CyberData 011214 Dokumentacja Pobierz pdf (Strona 39)

Installing the VoIP V3 Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930522C CyberData Corporation

2. On the SIP Configuration page, enter values for the parameters indicated in Ta bl e 2-10.

Table 2-10. SIP Configuration Parameters

Web Page Item Description

Enable SIP Operation Enables or disables SIP operation.

SIP Settings

Primary SIP Server Use this field to set the address (in dotted decimal notation

or as a canonical name) for the Primary SIP Server. This

field can accept canonical names of up to 255 characters in

length.

Primary SIP User ID Type the SIP User ID for the Primary SIP Server

(up to 64 alphanumeric characters).

Primary Auth ID Type the Authenticate ID for the Primary SIP Server

(up to 64 alphanumeric characters).

Primary SIP Auth Password Type the Authenticate Password for the Primary SIP

Server (up to 64 alphanumeric characters).

Backup SIP Server 1

Backup SIP Server 2

• If all of the Primary SIP Server and Backup SIP Server

fields are populated, the device will attempt to stay

registered with all three servers all of the time. You can

leave the Backup SIP Server 1 and Backup SIP Server

2 fields blank if they are not needed.

• In the event of a registration failure on the Primary SIP

Server, the device will use the next highest priority server

for outbound calls (Backup SIP Server 1). If Backup SIP

Server 1 fails, the device will use Backup SIP Server 2.

• If a higher priority SIP Server comes back online, the

device will switch back to this server.

Backup SIP User ID 1

Backup SIP User ID 2

Type the SIP User ID for the Backup SIP Server

(up to 64 alphanumeric characters).

Backup SIP Auth ID 1

Backup SIP Auth ID 2

Type the SIP Authenticate ID for the Backup SIP Server

(up to 64 alphanumeric characters).

Backup SIP Auth Password 1

Backup SIP Auth Password 2

Type the SIP Authenticate Password for the Backup SIP

Server (up to 64 alphanumeric characters).

Use Cisco SRST When selected, the backup servers are handled according

to Cisco SRST (Survivable Remote Site Telephony).

Remote SIP Port* Type the Remote SIP Port number (default 5060)

(8 character limit).

Local SIP Port* Type the Local SIP Port number (default 5060)

(8 character limit).

Outbound Proxy Type the Outbound Proxy as either a numeric IP address in

dotted decimal notation or the fully qualified host name

(255 character limit [FQDN]).

Outbound Proxy Port Type the Outbound Proxy Port number (8 character limit).

For information about Point-to-Point Configuration, see

Section 2.4.6.1, "Point-to-Point Configuration".

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 96 97

Komentarze do niniejszej Instrukcji

Brak uwag

CyberData 011214 Dokumentacja Strona 39

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony CyberData 011214