CyberData 011214 Dokumentacja Pobierz pdf (Strona 24)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2.3.6 RTFM Button

When the Intercom is operational and linked to the network, use the Reset Test Function

Management (RTFM) button (see SW1 in

Figure 2-10) on the Intercom board to announce and

confirm the Intercom’s IP Address and test that the audio is working.

Note You must do this test prior to final assembly.

Figure 2-10. RTFM Button

2.3.6.1 Announcing the IP Address

To announce a device’s current IP address:

1. Press and release the RTFM button (SW1) within a five second window.

Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default

to 10.10.10.10 if a DHCP server is not present).

Note Pressing and holding the RTFM button for longer than five seconds will restore the device to

the factory default settings.

2.3.6.2 Restoring the Factory Default Settings

When troubleshooting configuration problems, it is sometimes convenient to restore the device to a

known state.

Note Each Intercom is delivered with factory set default values.

To restore the factory default settings:

1. Press and hold the RTFM button (SW1) for more than five seconds.

2. The device announces that it is restoring the factory default settings.

SW1

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 118 119

Brak uwag

CyberData 011214 Dokumentacja Strona 24