CyberData 011123x Dokumentacja Pobierz pdf (Strona 38)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

2.3.5.1 Point-to-Point Configuration

When the board is set to not register with a SIP server, it's possible to set the device to dial out to a

single endpoint. To do this, do the following:

1. On the SIP Configuration page (Figure 2-14), make sure that the Register with a SIP Server

parameter is not selected.

2. On the Button Configuration page (Figure 2-15 and Figure 2-16), type the IP address of the

remote device that you want to contact into a Keypad or Call Button field (in either Speed Dial

Mode or Security Dial Mode).

Note There is no way to place a point-to-point call in Telephone Dial Mode or Cellphone Dial

Mode. The Intercom can receive point-to-point calls in any mode.

Note The delayed DTMF functionality is available in the Point-to-Point Mode.

Note Establishing point-to-point SiP calls may not work with all phones.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 85 86

Brak uwag

CyberData 011123x Dokumentacja Strona 38