CyberData 011123x Dokumentacja Pobierz pdf (Strona 77)

Mount the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Operations Guide 930370M CyberData Corporation

Figure A-1 shows a wall mounting option.

Figure A-1. Wall Mounting Option

To mount the Intercom:

1. Cut out a section of the wall that is 6.03 inches [153 mm] from left to right and 5.28 inches [134

mm] from top to bottom.

2. Use a flat blade screwdriver to remove the knockout (KO) from the back of the gang box.

3. Feed the network cable from the wall cutout through the knockout of gang box and into J1 of the

Intercom.

4. Install the gang box into the wall cutout.

5. Tighten the four flag nuts with a Phillips screwdriver.

6. Place the Intercom over the gang box.

7. Secure the Intercom to the gang box with the four mounting screws.

Wall Cutout

Gang Box

VoIP Indoor Intercom

with Keypad Assembly

Flagnut (4x)

to J1

Network

Cable

Tape Here

Reflective

Mounting

Screw (4x)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 85 86

Brak uwag

CyberData 011123x Dokumentacja Strona 77