CyberData 011305 Dokumentacja Pobierz pdf (Strona 38)

Operations Guide 930943A CyberData Corporation

Installing the VoIP Indoor Intercom

Configure the SIP Parameters

Note You must click on the Save button and then the Reboot button for the changes to take

effect.

2.4.6.1 Dial Out Extension Strings and DTMF Tones (using rfc2833)

On the SIP Configuration Page, dial out extensions support the addition of comma delimited

pauses and sending additional DTMF tones (using rfc2833). The first comma will pause three

seconds after a call is fi

rst established with a remote device. Subsequent commas will pause for 2

seconds. A pause of one second will be sent after each numerical digit.

Extension String Resulting Action

Note The maximum number of total characters in the dial-out field is

64.

NAT ping 

(check box if PBX is not local)

Check this box if the PBX server is remote and you are

experiencing problems establishing calls with the PBX.

Disable rport Discovery Check this box prevent the device from including the public

WAN IP address in the contact information that is sent to the

remote SIP servers. This will generally only need to be enabled

when using an SBC in conjunction with a remote SIP server.

Call Disconnection

Terminate call after delay (in seconds) Type the desired number of seconds that you want to transpire

after a connection delay before a call is terminated.

Note: A value of 0 will disable this function.

RTP Settings

RTP Port (even) Specify the port number used for the RTP stream after

establishing a SIP call. This port number has to be an even

number and defaults to 10500.

Dial Out Settings

Dial Out Extension Type the dial out extension number (64 character limit).

Note: For information about dial-out extension strings and

DTMF tones, see Section 2.4.6.1, "Dial Out Extension Strings

and DTMF Tones (using rfc2833)".

Extension ID Type the desired Extension ID (64 character limit).

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

Table 2-9. SIP Configuration Parameters (continued)

Web Page Item Description

Table 2-10. Examples of Dial-Out Extension Strings

302 Dial out extension 302 and establish a call

302,2 Dial out extension 302 and establish a call, wait 3 seconds then send the

DTMF tone '2'

302,25,,,4,,1 Dial out extension 302 and establish a call, wait 3 seconds then send the

DTMF tone '2', send out DTMF tone 5, wait 6 seconds, send out DTMF

tone 4, wait 4 seconds, send out DTMF tone 1

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 86 87

Komentarze do niniejszej Instrukcji

Brak uwag

CyberData 011305 Dokumentacja Strona 38

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony CyberData 011305